Ninja 13ci/3000psi HPA Tank - Black

**PRICES ARE FOR ALUMINUM REGULATORS ONLY. LET US KNOW IF YOU WOULD LIKE TO UPGRADE TO STAINLESS STEEL**

The Ninja Pro V3 regulator is the newest regulator from Ninja, superseding the very popular Pro V2 Regulator. The Pro V3 reg offers some new great improvements over the Pro V2. The Pro V3 regulator has a new ergonomic design with a rotational bonnet that allows the player to adjust the position of the fill nipple and gauge when screwed into their marker!

Safety:

• ASTM COMPLIANT bonnet thread
• ASTM COMPLIANT DOT burst disc
• ASTM COMPLIANT Low pressure burst disk
• ASTM COMPLIANT Restrictor, bleed hole and safety groove
• Mini Fill Valve IS hardened, plated 5000 psi rated
• Reg installed to ASTM specifications

Tank Features:

• D.O.T. approved Aluminum bottle
• NOT TC STAMPED
• 5 year hydro

Standard UL Regulator Features:

• Similar to the Standard regulator, the Ultralite regulator is a bit lighter by offering smaller parts and a lightweight aluminum bonnet.
• The UL Regulator ships at 800psi Output.
• 500-800psi output range. Adjustable to 500psi, 650psi, or 800psi.
• Dual thread o-rings to ensure no leaking out of your ASA
• Comes standard with a micro gauge and mini fill valve to save weight.
• O-ring fill valve (OFV) - fill nipple seals using an o-ring instead of the traditional pipe tape
• MADE IN THE USA!

Pro V3 Standard Regulator Features:

• Factory set output pressure of 550 PSI - perfect for most modern electronic and mech paintball guns.
• 550-750 PSI output range - output is adjustable by installing shims
• 360 Degree rotational bonnet to ensure gauge and fill nipple line up where you want them
• Dual thread o-rings to ensure no leaking out of your ASA
• O-ring fill valve (OFV) - fill nipple seals using an o-ring instead of the traditional pipe tape
• Parts kit included
• MADE IN THE USA!

Pro V3 SLP Regulator Features:

• Factory set to 300 psi output
• 360 Degree rotational bonnet to ensure gauge and fill nipple line up where you want them
• Dual thread o-rings to ensure no leaking out of your ASA
• O-ring fill valve (OFV) - fill nipple seals using an o-ring instead of the traditional pipe tape
• Parts kit included

Pro V3 SHP Regulator Features:

• Factory set to 1050 psi output
• 360 Degree rotational bonnet to ensure gauge and fill nipple line up where you want them
• Dual thread o-rings to ensure no leaking out of your ASA
• O-ring fill valve (OFV) - fill nipple seals using an o-ring instead of the traditional pipe tape
• Parts kit included